All music files are post-synchronized by an ultra precise FemtoClock. The data processed in this way are free from “jitter“, the most frequent cause of a poor digital playback quality. The sound is open, natural and follows the recording in its true sense. An extra gain in sound quality is provided by the option to convert any data into a 1-bit signal (DSD). The converter blocks are run in mono mode, each channel has its own D/A converter. For the output stage we use one of the best amp modules on the market which also cuts a very fine figure as a headphone amplifier.

General

Power consumption: 0.1 W standby, 3.5 W operation, 11 W max.
Dimensions (W x H x D): 107 x 40 x 107 mm (4.2 x 1.6 x 4.2 in)
Weight: 300 g (0.66 lbs)
Power supply: 5V DC

D/A converter

Resolution: 384 kHz/32 bit and DSD 256
Dynamic range: > 120 dB
THD & Noise: < 0.001 % (@ 0 dB FS)
Clock: ultra low jitter MEMS FemtoClock
Re-sampling: bit-perfect or DSD
Converter architecture: two AK4452 DACs in dual differential mono mode, AK4137 re-sampler
Output voltage: 2.0 V @ 0 dB FS
Output impedance line output: 100 ohms
Headphone connector: 3.5 mm mini jack socket
Recommended headphone impedance: 32 -200 ohms